Houle Products


Manure Pumps and Agitators


Agi-Pompe^®	Super Pump
To homogenize and transfer liquid manure containing long bedding and bottom sediments.	To agitate and transfer slurry with limited amount of chopped bedding.


Pumps for Lagoon


3-Point Hitch Articulated


Agitator


Electric Pumps for Hog and Dairy Manure

Maxi-Pump
High Capacity Centrifugal Pump

Pump water, urine and manure containing fibrous material

"S" shape 12" intake pipe to install the Maxi-Pump above ground. 12" intake pipe installed through wall of reservoir.	Rotative selector valve can be switched at full R.P.M. 12" intake gate valve with hose adapter and flange. 12" intake gate valve with 2 flanges.	Maxi-Pump and Side Mount Agitator Kit
		Advantages Powerful surface and bottom agitation for fast mixing of manure. A rubber hose between the Maxi-Pump and the reservoir absorbs vibrations. Note: The Maxi-Pump can be installed above ground level to keep environment clean and help draining the pump once reservoir is empty. Components Specifications Two kinds of 12" intake pipes are available to easily adapt most reservoirs. Hydraulic directional valve to select agitation of reservoir or loading of spreader. 20 feet loading pipe. Large operating deck which attaches to the reservoir at the exact place wanted. Rotative valve to select surface or bottom agitation without decreasing R.P.M. of P.T.O. shaft. Surface nozzle with operating radius of 180° horizontal and 60° vertical. Bottom nozzle with speed reducer and operating radius of 180° horizontal.



Maxi-Pump and Port Hole Agitator
Advantages Positive agitation to minimize solid residues between the port holes of pit. Loading capacity up to 1500 G.P.M. No hose to connect to load the spreader.		Components Specifications Reinforced 6" suction hose with intake protector. Hydraulic directional valve to select agitation of pit or loading of spreader. 20 feet loading pipe. 6" P.V.C. brown transfer hose (100 P.S.I.) Remote agitator (steel or aluminum) that rotates to help agitation between the port holes of pit.

Hand primer pump with 6" gate valve.		Optional hydraulic motor on primer pump.
Aluminum or steel remote agitator kit 12' long with two rotative levers and 3" nozzle.

Maxi-Pump For Solid Manure Platform

Advantages

Siphones water alongside the wall of platform to load solid manure with front end loader.

Reduces the time required to load manure.

Components Specifications

Reinforced 6" suction hose with intake protector.

20 feet loading pipe.

Low pressure discharge elbow (in option)

6" rubber suction hose alone or with alumnium tube.


Maxi-Pump Specifications
Standard Equipment 3 point hitch with adjustable legs. 20" diameter impeller with 6 blades. Bearing assembly in oil bath protected by a greasable 3 seals mechanism. Intake flapper valve with thick rubber to positively shut against a stainless steel pipe. 6" intake and discharge. Optional Maxi-Pump on trailer. Manual primer pump or primer pump with hydraulic motor. Impeller 28" x 540 RPM or impeller 18" x 1000 RPM.	Intake flapper closed.	Intake flapper opened.
	Maxi-Pump on trailer.


Pumps And Valves For Flush System
3" High Pressure Pump On Pontoon
*To transfer liquid up to 63 feet of working head.* Pump Specifications Direct drive - 3 to 10 HP. Unique bearing assembly with greasable flanged bearings always above water level. No seals and bearings in urine. The pump can be adjusted heightwise to get only 4 inches of liquid over the pump housing. Built with a progressive centrifugal pump housing to deliver high pumping head with low HP. Curved blade impeller made of ductile cast iron. Grease bank allowing the installation of remote grease lines to lubricate the pump from the side of the lagoon. Pump can be tilted up for easy maintenance.
	*Reliable low horsepower pump to refill flush tanks.*
Pontoon Specification Each polyethylene float is completely filled with foam and is UV resistant assuring long life. Floats overall dimensions: Width 7'3" - Length 8' 4". Total weight of pump and pontoon: ;820 pounds.


4" High Pressure Pump
*To transfer liquid up to 147 feet of working head.*
Built with a progressive centrifugal pump housing to deliver high pumping head.	14.5" impeller driven by motor ranging between 20 and 40 HP.	Belt driven allowing to adjust pump RPM to use maximum motor efficiency.
4" High Pressure Pump On Pontoon
		The 4" high pressure pump is geared to transfer 500 US GPM at the highest pumping head possible. See graph below.

		4" Vertical High Pressure Pump with standard floor mount support.

4" High Pressure Vertical Pump

Pump lentgh available: 6 - 8 - 10 and 12 feet.

4" AGI-POMPE^®
4 propeller diameters: 16" - 18" - 20" and 24", to increase or decrease propeller or impeller speed depending on agitation and pumping needs.	16" impeller driven by motor ranging between 15 and 40 HP.	Belt driven allowing to adjust pump RPM to use maximum motor efficiency.

4" Horizontal Agi-Pompe^® 12 Feet On Pontoon
To agitate main lagoons containing filtrated liquid from sloped screen separators and processed through fine fiber lagoons.




4" Vertical Agi-Pompe^® To agitate a reception pit and feed a sloped screen separator. Pump length available: 6 - 8 - 10 and 12 feet.

Optional sliding/tilting wall mount support	Optional agitation nozzle on 4" vertical Agi-Pompe^®

8" Flush Pump
Low RPM to run many hours a day with minimum maintenance.
A check valve at the pump discharge keeps the water in the flush line between flushes to reduce air hammering.	16" impeller driven by motor ranging between 7.5 and 40 HP.	Belt driven allowing to adjust the pump RPM to use maximum motor efficiency.
8" Flush Pump On Pontoon

The 8" flush pump is normally geared to flush at the highest rate possible and at relatively low pumping head. See graph below.	8" Vertical Flush Pump Pump length available: 6 - 8 - 10 and 12 feet.
OR The 8" flush pump can be geared to flush 1,800 US GPM at the highest pumping head possible. See chart below.

Optional sliding / tilting wall mount support